High Strength PET Nonwoven Fabric

High Strength PET Nonwoven Fabric

High strength PET nonwoven fabric is a polyester roll goods engineered for load-bearing and reinforcement duty: basal geotextile, belt reinforcement, structural separation and industrial padding. Polyester is chosen for this class because it combines high tenacity with heat resistance and negligible creep under sustained load.
Send Inquiry
Description
Technical Parameters

High strength PET nonwoven fabric is a polyester roll goods engineered for load-bearing and reinforcement duty: basal geotextile, belt reinforcement, structural separation and industrial padding. Polyester is chosen for this class because it combines high tenacity with heat resistance and negligible creep under sustained load.

 

Strength in a needled structure comes from fibre tenacity, fibre length, needling density and, where required, a reinforcing scrim. A well-built 400 gsm high strength PET can outperform a commodity 600 gsm web on both tensile and CBR puncture.

 

Grades run from 200 to 800 gsm, with optional scrim reinforcement, calendering and UV stabilization. Datasheets report machine and cross direction tensile, elongation, trapezoid tear and CBR puncture so the material can be checked against a design specification.

 

Key Advantages

 

High tenacity fibre Elevated tensile and tear values at a given mass, so lower weight meets the same design load.

Low creep under load Polyester resists the long-term elongation that causes structural separation layers to fail.

CBR puncture resistance Protects geomembranes and liners during backfill and compaction.

Scrim reinforcement option A grid or scrim layer adds dimensional stability for high-stress installations.

Heat stability Holds properties during hot-climate installation and asphalt-adjacent service.

Design-data documentation Test values reported against named standards for direct comparison with the specification.

 

Applications

 

  • Basal and separation geotextile in civil works
  • Conveyor belt and drive belt reinforcement
  • Structural reinforcement and membrane carrier
  • Heavy duty industrial padding
  • Railway and embankment stabilization
  • Wind and solar mounting protection layers

 

FAQ

 

Q: Can you meet a specified CBR puncture value?

A: Yes. Send the target value and test standard; we will propose the grade and confirm with a test report on the qualification lot.

Q: Is creep data available for permanent load design?

A: Yes, long-term creep curves from a recognised test method can be supplied for design review.

Q: What is the maximum roll weight you can supply?

A: Up to around 80 kg per roll for manual handling on site, or heavier with mechanical lifting. Confirm your site handling method.

Q: Do you supply scrim-reinforced grades?

A: Yes, with a polyester grid or woven scrim laminated during needling or afterwards.

 

Send Message